Taking the handle off the board and refitting it — throttle, wiring, and kill-switch connections.
Watch on YouTube ↗ · JETSURF Service Tutorials #14 — the final video in the series (~10.5 min).
The handle carries the throttle, the kill switch, and the wiring that runs down to the electronics — so a handle swap is really a throttle-cable and wiring job. The full video walks the whole procedure end to end.
Coming soon. The timestamped step list for this guide isn't written up yet — follow the video for now. Check back, or email us if you want a heads-up when it's posted.
Written up by riders from the manufacturer walkthrough above and our own time with these boards — not official JETSURF documentation. Procedures, torque figures and service intervals vary by model and year: check your owner's manual, and if a job is beyond you, book it with a service centre. Work on your board at your own risk.
We'll email you when the next maintenance tutorial goes live.